Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
Nous sommes clairs que ce soit necessaire d'avoir quelques certificats IT dans cette industrie de plus en plus intense. Le Certificat IT est une bonne examination des connaissances démandées. Dans l'Industrie IT, le test Juniper JN0-343 est une bonne examination. Mais c'est difficile à passer le test Juniper JN0-343. Pour améliorer le travail dans le future, c'est intélligent de prendre une bonne formation en coûtant un peu d'argent. Vous allez passer le test 100% en utilisant le Pass4Test. Votre argent sera tout rendu si votre test est raté.
Le Certificat de Juniper JN0-343 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification Juniper JN0-343, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test JN0-343 sans aucun éffort, en même temps, le test de Juniper JN0-343 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test Juniper JN0-343 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
Code d'Examen: JN0-343
Nom d'Examen: Juniper (Juniper Networks Certified Internet Specialist (JNCIS-ENT))
Questions et réponses: 393 Q&As
Vous pouvez télécharger tout d'abord une partie de Q&A Certification Juniper JN0-343 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Juniper JN0-343. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Juniper JN0-343. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Juniper JN0-343. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Juniper JN0-343 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
JN0-343 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-343.html
NO.1 Which two pieces of information are communicated by IS-IS TLVs? (Choose two.)
A. network protocols supported
B. designated router priority
C. authentication key
D. PDU Length
Answer: A,C
Juniper JN0-343 examen JN0-343 examen
NO.2 Which Junos command correctly configures the ge-0/0/0.0 interface to operate only for IS-IS Level 2?
A. set interfaces ge-0/0/0.0 family iso level 2 enable
B. set interfaces ge-0/0/0.0 family iso level 1 disable
C. set protocols isis interface ge-0/0/0.0 level 2 enable
D. set protocols isis interface ge-0/0/0.0 level 1 disable
Answer: D
Juniper JN0-343 JN0-343 examen
NO.3 In the following output, what does the asterisk indicate?
A. The interface is configured as a trunk.
B. The interface is configured for spanning-tree protocol.
C. The interface is active.
D. The interface is inactive.
Answer: C
certification Juniper JN0-343 JN0-343 certification JN0-343
NO.4 Which two OSPF LSA types can be used to advertise routes between areas? (Choose two.)
A. router
B. network
C. external
D. summary
Answer: C,D
Juniper JN0-343 JN0-343 JN0-343 examen JN0-343 examen
NO.5 Which routing-instance type allows the sharing of interface routes and the support features used in
source-based routing?
A. virtual-router
B. vrf
C. forwarding
D. multi-instance
Answer: C
Juniper examen certification JN0-343 JN0-343 examen
NO.6 Which BGP attributes are listed in the correct route selection order?
A. local preference, AS path, origin, MED
B. local preference, MED, AS path, origin
C. AS path, local preference, origin, MED
D. MED, origin, local preference, AS path
Answer: A
Juniper JN0-343 examen JN0-343 examen JN0-343
NO.7 What is the default behavior of a trunk port when it receives transit traffic without a VLAN tag?
A. It drops the traffic.
B. It forwards the traffic.
C. It tags the transit traffic with lowest VLAN ID permitted on the trunk.
D. It tags the transit traffic with highest VLAN ID permitted on the trunk.
Answer: A
Juniper JN0-343 examen certification JN0-343 certification JN0-343
NO.8 Which configuration disables a port when more than 30,000 Kbps of broadcast traffic is received over
an aggregated Ethernet interface with two member links?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-343 certification JN0-343 JN0-343 JN0-343 examen
NO.9 What is the correct sequence of OSPF adjacency formation?
A. Down, Init, ExStart, 2way, Loading, Exchange, Full
B. Down, 2way, Init, ExStart, Exchange, Loading, Full
C. Down, Init, 2way, ExStart, Exchange, Loading, Full
D. Down, Init, 2way, Loading, ExStart, Exchange, Full
Answer: C
Juniper examen JN0-343 JN0-343 examen
NO.10 Which configuration summarizes external routes in the 172.16.0.0/22 range into a single prefix on an
ABR for Area 1?
A. protocols { ospf { area 0.0.0.1 {
nssa {
default-lsa {
default-metric 1;
metric-type 1;
}
}
area-range 172.16.0.0/22;
}
}
}
B. protocols {
ospf {
area 0.0.0.1 {
nssa {
area-range 172.16.0.0/22;
}
}
}
}
C. protocols {
ospf {
area 0.0.0.1 {
stub summaries;
}
}
}
D. protocols {
ospf {
area 0.0.0.1 {
nssa;
area-range 172.16.0.0/22 restrict;
}
}
}
Answer: B
Juniper JN0-343 JN0-343 examen JN0-343 JN0-343
NO.11 Which configuration correctly sets interface ge-0/0/4 in trunk mode, carrying VLANs v10 and v20?
A. ge-0/0/4 {
unit 0 {
family ethernet-switching {
vlan {
members [ v10 v20 ];
}
} } }
B. ge-0/0/4 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
C. ge-0/0/4 {
vlan-tagging;
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members [ v10 v20 ];
}
}
}
}
D. ge-0/0/4 {
unit 10 {
family ethernet-switching;
}
unit 20 {
family ethernet-switching;
}
}
Answer: B
certification Juniper JN0-343 JN0-343
NO.12 Which statement describes the default Junos OS behavior for OSPF?
A. External LSAs are advertised in a stub area.
B. An ABR does not announce a default route into a stub area.
C. Stub area internal routers generate a default route.
D. Only totally stubby areas need a default route.
Answer: B
certification Juniper JN0-343 certification JN0-343 JN0-343 examen
NO.13 Given the following output, what has been configured for the 192.168.3.0/24 prefix?
A. per-flow load balancing
B. a floating static route
C. per-packet load balancing
D. a qualified next hop
Answer: A
Juniper JN0-343 JN0-343 JN0-343 examen JN0-343
NO.14 Which of the following is enabled by default on an EX Series switch?
A. MAC move limiting
B. storm control
C. IP source guard
D. dynamic ARP inspection
Answer: B
Juniper certification JN0-343 JN0-343 examen
NO.15 Which of the following can be used for both security and loop prevention?
A. firewall filters
B. DHCP snooping
C. dynamic ARP inspection D. MAC move limiting
Answer: D
Juniper certification JN0-343 JN0-343 JN0-343 JN0-343 examen
NO.16 Which three statements correctly describe the default BGP advertisement behavior in the Junos OS?
(Choose three.)
A. Routes learned through EBGP are advertised to IBGP peers.
B. Routes learned through EBGP are advertised to other EBGP peers.
C. Routes learned through IBGP are advertised to other IBGP peers.
D. Routes learned through IBGP will be advertised to EBGP peers.
E. Routes learned through an IGP are automatically advertised to EBGP peers.
Answer: A,B,D
Juniper JN0-343 certification JN0-343 certification JN0-343 JN0-343
NO.17 An administrator finds that traffic from a large file download over an HTTP session is not load-balanced
across multiple links in a LAG. What is the possible cause?
A. Per-packet load-balancing is not configured.
B. The redundant path has a different IGP metric.
C. The hash key is not configured in the forwarding-options stanza.
D. This is the expected behavior.
Answer: D
Juniper JN0-343 examen JN0-343 certification JN0-343 JN0-343 examen certification JN0-343
NO.18 Click the Exhibit button.
Based on the exhibit, in which spanning-tree state would the indicated port be.?
A. listening
B. learning
C. forwarding
D. blocking
Answer: C
Juniper JN0-343 examen JN0-343
NO.19 Which command correctly assigns AS 65432 as the local router's autonomous system?
A. set protocols bgp local-as 65432
B. set routing-options local-as 65432
C. set protocols bgp autonomous-system 65432
D. set routing-options autonomous-system 65432
Answer: D
Juniper certification JN0-343 JN0-343
NO.20 When processing inbound Ethernet frames, which firewall filter is evaluated first by an EX Series
switch?
A. port filter
B. VLAN filter
C. trunk filter
D. route filter
Answer: A
Juniper examen JN0-343 JN0-343 examen certification JN0-343
NO.21 When loop protection is enabled on an interface, what happens when the port stops receiving BPDUs?
A. The port is placed in a loop-inconsistent role.
B. The port is placed into listening mode.
C. The port is transitioned into a forwarding state.
D. The interface is disabled.
Answer: A
Juniper certification JN0-343 JN0-343 JN0-343
NO.22 Which OSPF area type can contain Type 7 LSAs?
A. backbone
B. not-so-stubby
C. stub
D. totally stubby
Answer: B
certification Juniper JN0-343 certification JN0-343
NO.23 Which OSPF LSA type is sent by all routers in an area to advertise its connected subnets?
A. router
B. network
C. external
D. summary
Answer: A
Juniper examen JN0-343 examen JN0-343 examen
NO.24 Which statements are true about graceful Routing Engines switchover (GRES)?
A. Configuration on both Routing Engines must be synchronized.
B. The backup Routing Engine cannot be managed through IP address because RPD does not run on
backup the Routing Engine.
C. Different hostnames must be configured on both Routing-Engines.
D. Both Routing-Engines are managed through a single out-of-band-management IP address.
Answer: A
Juniper certification JN0-343 JN0-343 examen
NO.25 Which two of the following are functions of the BGP update message? (Choose two.)
A. It withdraws routes that are no longer valid.
B. It notes that an unsupported option is detected from the open message.
C. It transports routing information between BGP peers.
D. It readvertises routes that have already been sent and acknowledged.
Answer: A,C
certification Juniper certification JN0-343 JN0-343 certification JN0-343
NO.26 What are two valid BPDU types? (Choose two.)
A. topology change notification
B. configuration change
C. configuration
D. root bridge
Answer: A,C
Juniper JN0-343 certification JN0-343 JN0-343 JN0-343
NO.27 What is the minimum configuration necessary to create two VLANs and two operational RVIs?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: B
Juniper JN0-343 examen JN0-343 certification JN0-343 JN0-343
NO.28 Which protocol is an IGP?
A. LACP
B. STP
C. OSPF
D. PAGP
Answer: B
Juniper JN0-343 examen JN0-343
NO.29 How much overhead does the GRE header add to an IPv4 packet?
A. 24 bytes
B. 32 bytes
C. 48 bytes
D. 64 bytes
Answer: A
Juniper JN0-343 examen JN0-343 JN0-343
NO.30 Configuring bpdu-timeout-action enables which protection mechanism?
A. root protection
B. BPDU protection
C. loop protection
D. RSTP protection
Answer: C
Juniper examen certification JN0-343 JN0-343 certification JN0-343 certification JN0-343
Pass4Test vous promet de vous aider à passer le test Juniper JN0-343, vous pouvez télécharger maintenant les Q&As partielles de test Juniper JN0-343 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
没有评论:
发表评论