But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test SAP C_TSCM42_64 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test SAP C_TSCM42_64, votre argent sera tout rendu.
Le Certificat SAP C_TSCM42_64 est un passport rêvé par beaucoup de professionnels IT. Le test SAP C_TSCM42_64 est une bonne examination pour les connaissances et techniques professionnelles. Il demande beaucoup de travaux et efforts pour passer le test SAP C_TSCM42_64. Pass4Test est le site qui peut vous aider à économiser le temps et l'effort pour réussir le test SAP C_TSCM42_64 avec plus de possibilités. Si vous êtes intéressé par Pass4Test, vous pouvez télécharger la partie gratuite de Q&A SAP C_TSCM42_64 pour prendre un essai.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test SAP C_TSCM42_64. Votre argent sera tout rendu si vous échouez le test.
Les produits de Pass4Test sont préparés pour le test Certification SAP C_TSCM42_64, y compris les formations et les informations ciblées au test SAP C_TSCM42_64. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Code d'Examen: C_TSCM42_64
Nom d'Examen: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)
Questions et réponses: 80 Q&As
Vous n'avez besoin que de faire les exercices à propos du test SAP C_TSCM42_64 offertes par Pass4Test, vous pouvez réussir le test sans aucune doute. Et ensuite, vous aurez plus de chances de promouvoir avec le Certificat. Si vous ajoutez le produit au panier, nous vous offrirons le service 24h en ligne.
Nous croyons que pas mal de candidats voient les autres site web qui offrent les ressources de Q&A SAP C_TSCM42_64. En fait, le Pass4Test est le seul site qui puisse offrir la Q&A recherchée par les experts réputés dans l'Industrie IT. Grâce à la Q&A de Pass4Test impressionée par la bonne qualité, vous pouvez réussir le test SAP C_TSCM42_64 sans aucune doute.
Si vous vous inscriez le test SAP C_TSCM42_64, vous devez choisir une bonne Q&A. Le test SAP C_TSCM42_64 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.
C_TSCM42_64 Démo gratuit à télécharger: http://www.pass4test.fr/C_TSCM42_64.html
NO.1 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
SAP C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64
NO.2 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP C_TSCM42_64 examen C_TSCM42_64
NO.3 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
certification SAP C_TSCM42_64 C_TSCM42_64 examen certification C_TSCM42_64
NO.4 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
certification SAP certification C_TSCM42_64 C_TSCM42_64 C_TSCM42_64
NO.5 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAP C_TSCM42_64 certification C_TSCM42_64 C_TSCM42_64
NO.6 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
certification SAP certification C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 examen C_TSCM42_64
NO.7 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP examen C_TSCM42_64 C_TSCM42_64
NO.8 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP examen certification C_TSCM42_64 C_TSCM42_64 C_TSCM42_64
NO.9 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP certification C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64
NO.10 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP C_TSCM42_64 certification C_TSCM42_64 C_TSCM42_64 examen
Beaucoup de travailleurs dans l'Industrie IT peut obenir un meilleur travail et améliorer son niveau de vie à travers le Certificat SAP C_TSCM42_64. Mais la majorité des candidats dépensent beaucoup de temps et d'argent pour préparer le test, ça ne coûte pas dans cette société que le temps est tellement précieux. Pass4Test peut vous aider à économiser le temps et l'effort pendant le cours de la préparation du test SAP C_TSCM42_64. Choisir le produit de Pass4Test particulier pour le test Certification SAP C_TSCM42_64 vous permet à réussir 100% le test. Votre argent sera tout rendu si malheureusement vous ne passez pas le test.
没有评论:
发表评论