Les produits de Pass4Test sont préparés pour le test Certification Juniper JN0-660, y compris les formations et les informations ciblées au test Juniper JN0-660. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A Juniper JN0-660 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
Beaucoup de gens trouvent difficile à passer le test Juniper JN0-660, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test Juniper JN0-660 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Code d'Examen: JN0-660
Nom d'Examen: Juniper (Service Provider Routing and Switching, Professional)
Questions et réponses: 171 Q&As
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Juniper JN0-660, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Juniper JN0-660 coûtant un peu d'argent.
Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test Juniper JN0-660 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Pass4Test a de formations plus nouvelles pour le test Juniper JN0-660. Les experts dans l'industrie IT de Pass4Test profitant leurs expériences et connaissances professionnelles à lancer les Q&As plus chaudes pour faciliter la préparation du test Juniper JN0-660 à tous les candidats qui nous choisissent. L'importance de Certification Juniper JN0-660 est de plus en plus claire, c'est aussi pourquoi il y a de plus en plus de gens qui ont envie de participer ce test. Parmi tous ces candidats, pas mal de gens ont réussi grâce à Pass4Test. Ces feedbacks peuvent bien prouver nos produits essentiels pour votre réussite de test Certification.
La partie plus nouvelle de test Certification Juniper JN0-660 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel Juniper JN0-660. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
JN0-660 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-660.html
NO.1 Click the Exhibit button.
Given the drop profile in the exhibit, what is the drop probability when the buffer reaches 90% full?
A. 60%
B. 70%
C. 85%
D. 90%
Answer: B
Juniper JN0-660 JN0-660 JN0-660
NO.2 Your multicast receivers are indirectly connected to an MX Series router. The receivers need to join
multicast group 224.2.2.2. What must be configured in IGMP to receive report messages from receivers
that are multiple hops away?
A. By default, IGMP accepts report messages from indirectly connected receivers.
B. Promiscuous mode must be enabled in IGMP.
C. Promiscuous mode must be disabled in IGMP.
D. DVMRP protocol must be configured.
Answer: B
Juniper examen certification JN0-660 certification JN0-660
NO.3 Click the Exhibit button.
As shown in the exhibit, you have an adaptive LSP that requires 85 Mbps. The LSP is configured with a
primary path and a secondary path in standby mode. All connections in the MPLS network are Fast
Ethernet. Which statement is correct?
A. The primary and secondary paths are in an up state and operational.
B. The primary and secondary paths are in a down state and not operational.
C. The secondary path is in a down state and not operational.
D. The primary path is in a down state and not operational.
Answer: A
Juniper examen JN0-660 JN0-660 examen
NO.4 Click the Exhibit button.
All networks shown in the exhibit contain more than one BGP speaking router. You operate ISP A.
You must ensure that customer Y sends their traffic to you over the directly connected link but customer Y
is not used for transit into your network. What do you do to accomplish this? A. Advertise routes to
customer Y with the well-known no-transit community.
B. Advertise routes to customer X with the well-known no-advertise community.
C. Advertise routes to customer Y with the well-known no-export community.
D. Advertise routes to customer X with the well-known as-transit community.
Answer: C
Juniper examen JN0-660 certification JN0-660
NO.5 In which two ways does VPLS populate the MAC table? (Choose two.)
A. dynamically using BGP
B. dynamically using the source MAC address on received frames
C. dynamically using LDP
D. statically using CLI
Answer: B, D
Juniper examen JN0-660 examen JN0-660 certification JN0-660
NO.6 Click the Exhibit button.
Referring to the exhibit, which MPLS feature was used to make the LSP the preferred path for internal
routes.?
A. traffic engineering bgp-igp
B. traffic engineering shortcuts
C. traffic engineering mpls-forwarding
D. install active
Answer: C
Juniper JN0-660 certification JN0-660 JN0-660 examen certification JN0-660
NO.7 Which two statements are true about OSPFv3? (Choose two.)
A. OSPFv3 uses a 32-bit router ID to uniquely identify a node in the network.
B. OSPFv3 uses a 128-bit router ID to uniquely identify a node in the network.
C. OSPFv3 routes are always preferred over OSPFv2 routes for all traffic.
D. OSPFv3 and OSPFv2 can be configured at the same time.
Answer: A, D
Juniper examen JN0-660 JN0-660 examen
NO.8 You are provisioning a new customer for access to your Layer 3 VPN. The customer is using
172.16.35.0/24 as their internal IP address space, which is also being used by an existing Layer 3 VPN
customer. The two customers share many PE routers in common across your network. Which mechanism
allows these duplicate addresses to exist in your network?
A. route origin
B. route target
C. route refresh
D. route distinguisher
Answer: D
Juniper examen JN0-660 examen certification JN0-660
NO.9 Which operational mode command displays the number of configured forwarding classes?
A. show interfaces queue ge-1/0/0
B. show interfaces terse
C. show class-of-service interface
D. show forwarding classes
Answer: A
certification Juniper JN0-660 certification JN0-660
NO.10 You are the administrator for a network that uses IBGP. As the network grows, you must examine
options to support increased scale.
Which two scaling options should you consider? (Choose two.)
A. route reflection
B. areas
C. zones
D. confederations
Answer: B, C
Juniper JN0-660 JN0-660 certification JN0-660 JN0-660 examen
NO.11 Click the Exhibit button.
You are asked to configure an OSPF network based on the topology shown in the exhibit. You must keep
the link-state database in Area 1 as small as possible. What will accomplish this?
A. Area 0 should be configured as a stub area so that it will not announce routes into Area 1.
B. Area 1 should be configured as an NSSA to limit the size of the link-state database.
C. Area 1 should be configured as a stub area with no-summaries to limit the size of the link-state
database.
D. Area 0 should be configured with a virtual link to R4 to limit the size of the Area 1 link-state database.
Answer: C
certification Juniper JN0-660 JN0-660 certification JN0-660
NO.12 Which CoS feature supports per-VLAN queuing and scheduling?
A. multilevel scheduling
B. hierarchical scheduling
C. tagged queuing
D. per-instance queuing
Answer: C
Juniper examen certification JN0-660 JN0-660 JN0-660
NO.13 Your are the administrator for a network that uses IS-IS as its IGP. As the network grows, you find that
the protocol's default capabilities for setting metrics is limiting your options. Which feature can you
implement to provide a larger range of metric configuration capabilities?
A. extended metrics
B. wide metrics
C. expanded metrics
D. full metrics
Answer: D
Juniper certification JN0-660 JN0-660 examen JN0-660 examen certification JN0-660 JN0-660 examen
NO.14 You manage an MPLS network where the PE devices consist of multiple vendors.
You are asked to conceal the MPLS topology for all LSPs.
Which global configuration parameter will accomplish this?
A. Configure no-decrement-ttl on the ingress router only.
B. Configure no-propagate-ttl on the ingress router only.
C. Configure no-decrement-ttl on all routers within the MPLS network.
D. Configure no-propagate-ttl on all routers within the MPLS network.
Answer: D
Juniper JN0-660 JN0-660 examen JN0-660 examen certification JN0-660
NO.15 Click the Exhibit button.
All routers in the exhibit are running IS-IS level 2 routing. The wide-metrics-only parameter is configured
on all routers. Which metric does R1 see for the path to R4?
A. 136
B. 138
C. 310
D. 320
Answer: D
certification Juniper JN0-660 certification JN0-660 JN0-660 examen
NO.16 Click the Exhibit button.
In the exhibit, Area 1 is a not-so-stubby area.
Three networks are redistributed into Area 1 on R2.
You must summarize the redistributed network addresses in Area 1 so that only one network prefix is
re-advertised into Area 0. You must also summarize the loopback addresses of R1 and R2 into a single
address in Area 0.Which configuration sample on R3 and R5 will complete this task?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Juniper JN0-660 JN0-660 examen JN0-660
NO.17 Click the Exhibit button.
Referring to the exhibit, which type of traffic protection mechanism is used for the LSP?
A. fast-reroute
B. link-protection
C. node-link-protection
D. secondary
Answer: B
Juniper examen JN0-660 certification JN0-660 JN0-660 examen
NO.18 Click the Exhibit button.
On your MX Series router, traffic using the critical scheduler is out of profile. All other data is currently in
profile. Referring to the exhibit, which statement is correct?
A. The critical queue is serviced before the less-critical queue.
B. The critical queue is serviced after the left-over queue.
C. The critical queue is serviced before the data queue.
D. The critical queue is serviced before the voice queue.
Answer: B
certification Juniper JN0-660 JN0-660 JN0-660 examen
NO.19 Click the Exhibit button.
Based on the configuration in the exhibit, which statement is correct?
A. The 172.20.20.0/24 route is installed in the inet.0 table with the next hop of the LSP.
B. The 172.20.20.0/24 route is installed in the mpls.0 table with the next hop of the LSP.
C. The 172.20.20.0/24 route is installed in the inet.3 table with the next hop of the LSP.
D. The 172.20.20.0/24 route is installed in the inet6.3 table with the next hop of the LSP.
Answer: C
Juniper examen JN0-660 JN0-660 JN0-660
NO.20 Click the Exhibit button.
In the exhibit, ISP A is charged a higher rate for traffic sent to R2. You are asked to lower costs for ISP A
by configuring R1 to send traffic to R3 whenever possible.
What are two ways to do this? (Choose two.)
A. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 120
B. set protocols bgp group isp-b neighbor 192.0.2.6 local-preference 80
C. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 120
D. set protocols bgp group isp-b neighbor 192.0.2.10 local-preference 80
Answer: B, C
certification Juniper JN0-660 examen JN0-660 JN0-660 JN0-660
Le test Juniper JN0-660 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test Juniper JN0-660 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat Juniper JN0-660 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test Juniper JN0-660 avec l'aide de Pass4Test.
没有评论:
发表评论